Repair Guide: Changing Brake Pads on a 2016 Honda Accord

Repair Guide: Changing Brake Pads on a 2016 Honda Accord

Repair Guide: Changing Brake Pads on a 2016 Honda Accord

Problem Identified

Worn out brake pads cause a significant decrease in braking effectiveness and added strain on the brake rotors.

Tools Required

Step-by-step Repair Guide

Step 1: Loosen the Lug Nuts and Raise the Car

Loosen the lug nuts on the wheels with the lug wrench. Use your jack to raise the vehicle, and set it securely on the jack stands.

Step 2: Remove the Tires

After the car is securely on jack stands, completely remove the lug nuts and then the tire.

Step 3: Remove the Caliper Bolts

Once the tire is removed, find the caliper bolts and remove them using a wrench or socket.

Step 4: Remove Old Brake Pads

Slide the brake caliper off the disc, and then remove the old brake pads. Place the old brake pads and caliper aside carefully.

Step 5: Install New Brake Pads

Use the C-clamp to compress the brake caliper piston back into its bore. Once done, install the new brake pads on the caliper.

Step 6: Reassemble and Check

Put the caliper back onto the rotor, reattach it with the bolts, and firmly tighten. Repeat this process on the other brake pads as needed. Attach the tires back on, lower the car from the jack stands, and hand-tighten the lug nuts.

Step 7: Test Drive

Once everything is back together, take your car for a test drive to ensure the brakes are functioning properly.

Note: Always consult with a professional if you're unsure about performing any maintenance on your vehicle.